TL;DR: AVS/AVS+ Decoder Dongle Board
AndroidSBC sourcing desk: Allwinner H618 TV stick board pricing held flat through the current quarter serving international market, United States. The WF-H618-11 Allwinner H618 Android motherboard spans the voice remote dongle build with Bluetooth audio and eleven sister configurations in the WF-H618 series, all built on the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, HDMI 2.0a 4K*2K UHD output at 60Hz, and Android 12 with OTA upgrade firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-H618 family from the Longgang source factory in Shenzhen to international market and United States importers who run streaming sticks, Android TV boxes, IPTV channel lineups, digital signage networks, casting programmes and smart home hubs.
About AndroidSBC and the Allwinner H618 Android Motherboard Family
The twelve WF-H618 configurations share one Android 12 reference image and one peripheral driver package. A international market buyer who starts with the entry dongle and later needs the 24/7 signage build keeps the same application layer, the same OTA channel and the same compliance file, which is the reason United States distributors standardise on a single family rather than a single part number. The AndroidSBC engineering desk keeps one reference image for the whole WF-H618 line, so a United States partner developing against the board is testing against the same Android 12 build that ships in volume, not a one-off sample image.
WF-H618-11 Technical Specifications
| Parameter | AndroidSBC WF-H618-11 (voice remote dongle build with Bluetooth audio) | Industry Average |
|---|---|---|
| Processor | H618 quad-core ARM Cortex-A53 1.5GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 28nm | Older 40nm process |
| GPU | Mali-G31 MP2 | Older Mali-400 or basic 2D GPU |
| Memory | 2GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 16GB eMMC plus TF card up to 64GB | NAND flash 4GB or 8GB on competing boards |
| Video decode | VP9 Profile-2 and H.265 Main10 at 4K 60fps, AVS2 10bit at 4K 60fps, H.264 at 4K 30fps | 1080p decode ceiling on competing boards |
| Display output | HDMI 2.0a 4K*2K UHD output at 60Hz | HDMI 1.4 1080p output only |
| Audio and image | MP3, AAC, WMA, RM, FLAC and Ogg audio plus HD JPEG, BMP, GIF, PNG and TIF image | MP3 audio and JPEG image only |
| Wireless and control | WiFi 802.11 a/b/g/n/ac/ax dual-band 2.4G and 5.8G with Bluetooth 5.0 with IR receiver plus Bluetooth 5.0 voice remote | Single-band 2.4G WiFi 802.11n with no IR receiver |
| Interfaces | 1 HDMI, 2 USB with host and OTG, 1 IR receiver, 1 TF card slot | One USB port and no TF card slot |
| Operating system | Android 12 with OTA upgrade | Android 9 or Android 10 on competing boards |
| Power and reliability | DC 5V/1.5A with blue working and red standby LED, 0C to 40C operating ambient | No RTC and no scheduled power-on |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-H618-11 (voice remote dongle build with Bluetooth audio) holds its 4K HDMI output plus the remote and control path while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For United States importers sourcing the WF-H618 family, the WF-H618-11-A variant is the typical configuration for the voice remote streaming rollout use case, in a compact dongle footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Allwinner H618 Android Motherboards for United States Buyers
Then there is the content layer. In United States the streaming apps the operator already sells have to work on day one, which means the Android 12 build, the language packs and the remote update path have to be right before the first device is plugged in.
The thermal question is handled at the board level rather than in the enclosure. The WF-H618 tier chosen for international market is specified for fanless continuous duty with a hardware watchdog and a scheduled power cycle, and the burn-in record is run at the top of the temperature window rather than at 25C. 28100 Allwinner H618 boards cleared final test on September 28, 2026 for international market, booked on the Los Angeles - Shanghai lane. The country compliance note for United States sat in the shipment folder alongside the output validation report.
Competitive Comparison: WF-H618-11 vs Competing Android TV Dongle Boards
The boards competing with the WF-H618 family in United States tend to be repurposed phone boards. That is the root of three of the four differences below.
- Output and control readiness: HDMI 2.0a or 2.1 at 4K*2K UHD with IR, Bluetooth and 2.4G control paths enumerated, so international market integrators mount a locally sourced screen without a pairing pass.
- Bundled integration: HDMI output profile, remote control mapping, language packs, playback modes and the peripheral driver set ship in the carton; competing dongle boards sold to international market usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the international market integrator to obtain.
- Long-term supply: 16GB onboard eMMC with a TF card slot up to 64GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching international market.
Global Android TV, OTT Streaming and Smart Display Market Trends
The global Android TV Box market was valued at about USD 8.19 billion in 2025 and is projected to reach roughly USD 17.38 billion by 2032, a compound annual growth rate near 11.7 percent (Stats Market Research, Global Android TV Box Market Outlook 2025-2032). For a international market buyer that growth reads as a replacement cycle rather than a one-off project.
- Entry playback tier: WF-H618-11 covers loop, scheduled and interrupt playback on a single HDMI screen, which is the configuration most small streaming networks standardise on.
- Interactive mainstream tier: WF-H618-02 pairs a 4K HDMI output with IR, Bluetooth and 2.4G control for hospitality rooms, meeting spaces and classrooms.
- Connected and unattended tier: WF-H618-03 adds the RTC, the auto power-on behaviour and the watchdog recovery that retail signage and unattended lobbies require.
What a international market integrator should take from the forecasts is that the second and third batches matter more than the first. The WF-H618 family is specified so the second batch is the same board.
WF-H618-11 Application Scenarios
The WF-H618-11 voice remote dongle build with Bluetooth audio sits inside a twelve-configuration WF-H618 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-H618-11-A configuration is the typical build for the voice remote streaming rollout use case, with HDMI output profile, remote mapping and staged OTA management bundled.
- Streaming stick and TV modernisation: the WF-H618-11 turns an installed television into a 4K streaming screen without replacing the panel.
- Operator and IPTV channel lineups: the WF-H618-04 carries the language packs, the launcher and the OTA client the operator already sells.
- Screen casting and mirroring: the WF-H618-05 takes Miracast, DLNA and AirPlay traffic into meeting rooms and classrooms over dual-band WiFi.
- Hospitality rooms and serviced apartments: the WF-H618-06 pairs the auto power-on schedule with the IR and Bluetooth remote path a guest expects.
- Retail media and menu boards: the WF-H618-07 drives a 4K loop on shopfront and in-aisle screens from onboard eMMC.
- Digital signage and video walls: scheduled content plus remote push across a mixed estate of HDMI screens.
- Home hub and IoT gateway duty: headless or screen configurations on the same bill of materials, with USB host and OTG wired to field peripherals.
- Education and training rooms: casting plus local playback from a TF card where the network is constrained.
- Retrofit programmes in international market: the same compact dongle board re-uses the installed screen, mount and power path, so an estate can be upgraded room by room.
Partnership Models for international market Buyers
The WF-H618 family is offered on distribution, integration or private-label terms, and a international market partner can run more than one at a time.
- Distribution track: the partner buys the WF-H618 board against a published price list, keeps its own stock, and AndroidSBC supplies the HDMI output profile, the remote mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, launcher localisation and output validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-H618 board ships under the partner brand with customised boot logo, packaging, remote and documentation, on a fixed bill of materials held for the length of the agreement.
Every track is open to international market importers, distributors, system integrators and brand owners, with the same 1-3 day sample lead.
Frequently Asked Questions
Does the Allwinner H618 board family support a voice remote dongle build with Bluetooth audio?
Answer: Yes - voice remote dongle build with Bluetooth audio is supported across the WF-H618 line, and the international market configuration is locked as the reference for later lots so re-orders behave identically.
Which configurations are available in the WF-H618 family for United States buyers?
Answer: Twelve configurations are offered and they all share one Android 12 image, so a international market partner can move between them without re-writing the launcher or re-qualifying the streaming applications.
Can one H618 dongle drive a 4K HDMI screen and take IR, Bluetooth or 2.4G input?
Answer: One board covers both. The IR receiver, the Bluetooth path and the 2.4G control dongle are enumerated in the factory image, so the United States installer plugs the unit in and the remote works.
What is the minimum order quantity and the sample lead time for United States?
Answer: The sample MOQ is one carton and the sample lead time is 1-3 days from the Longgang factory. Mass-production lead time on a confirmed order is 15-30 days depending on the configuration and the United States compliance route.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Custom ROM work is a standard service: boot logo, boot animation, pre-installed apps, UI trimming and function module add or remove, all built on the same Android 12 baseline the United States partner qualified.
How are firmware updates delivered to a United States device estate after deployment?
Answer: AndroidSBC maintains a seven-year firmware window on the WF-H618 family. Updates reach United States estates through a staged OTA channel that can be paused, rolled back, or held to a pilot group.
What shipping terms does AndroidSBC support for United States orders?
Answer: For United States orders the options are FOB Shenzhen, CIF and EXW, plus direct delivery into marketplace or consolidation warehouses on the Port of Los Angeles route.
What happens if a unit fails in the field in United States?
Answer: RMA is handled per serial. The international market partner logs the unit, AndroidSBC matches it to the production record and dispatches a replacement from held buffer stock on the same Android 12 baseline.
Contact AndroidSBC: Start Your WF-H618-11 Sourcing Conversation
To start an Allwinner H618 board sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, international market integrators can reach the export desk through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to United States buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-H618 family.
